- Please Note: This is Not a Refrigerator but rather a magnet skin that sticks magnetically to your fridge
- Refrigerator Magnet Skin
- Sizes 36” x 65” or 36" x 70"
- Fits all Fridge Models
- Easy to Cut & Trim with a Box Cutter or Scissors
- Credit Card Thin & Ships Rolled Up in a Tube
- Sticks Instantly & Can Be Removed & Reapplied
- Measure Top to Bottom & Left to Right & Then Place Order
- Comes with One Page of Easy Instructions
- Product Instructions & Quick Tips Here
- For A Free Sample Email Name & Address
- Return Policy & All Purchases Final
Trimming the back side edge after installed, the utility knife cut easily into the material...making an overcut into the planned coverage area. luckily it is in the back and not really noticeable. Other than that looks great compared to the gray that was the refrigerator side. I wish the Stainless was a little darker...maybe even an option for the newer black stainless.
Easy instructions, a little difficult to cut due to the size but easy with a razor and a metal yard stick. It is not enough material to cover front and part of the sides that stick out from the cabinets. Well worth the product and price compared to buying a new fridge. Thank you!
Item arrived quick and in good shape. I laid it out for a few days flat. Measure twice cut once. Went on fridge easy and looks great! Would buy again
I have a new LG refrigerator that has the right side up against a wall, leaving the left side exposed, so I needed only one skin. This skin comes in a roll, with the width of the roll representing the width of the refrigerator and the length of the roll representing the height. No problem, except that the "stainless steel grain" runs the vertical length of the roll, not the horizontal width. To match the SS grain direction of my LG, which runs horizontal, I had to cut it in two pieces, one for the top and one for the bottom, position them so the grain ran horizontal while the factory cut of both pieces faced the front door, butt them together, then trim the bottom and back sides. THAT BEING SAID, it butted together seamlessly, you can't see the joint, and the factory cut on both ends of the roll was pretty good, allowing me to bend the pieces around the front corner and up against the seal without any gaps. As far as the tone goes, this skin does not match that of my LG or probably any other refrigerator, it is a very bright and glossy SS-looking finish. THAT BEING SAID, its a much better alternative to the dull dark gray sides of the LG refrigerator, and we like it more each day that passes. I'm giving it four stars, due to the direction of the grain and difficulties in creasing the material. If you care about the "grain" direction, you will have to plan accordingly - measure twice, cut once! The material itself won't allow for creasing a nice sharp 90-degree bend into it. If you intend to wrap the material around the front corners to the door seal. it will pull away from the narrow area on the front corner. Some double-sided tape will be needed to help keep the material in place if you intend to wrap around corners.
What could be easier? I placed the magnetic skin on the side of the refrigerator, positioned it so that it was straight, cut the excess off the back with scissors, and I was done. The entire process, including moving the refrigerator out and pushing it back in took under 15 minutes and I have a much better looking refrigerator side. Thanks for offering this terrific product!